user:trimen:mpclive:bootlog

Anonymous (anonymous@undisclosed.example.com) — 2020-01-26T12:27:20+00:00

	current
Line 1:	Line 1:
	+	<code>
	+	=> boot
	+	switch to partitions #0, OK
	+	mmc0(part 0) is current device
	+	Scanning mmc 0:6...
	+	Found /boot/extlinux/extlinux.conf
	+	Retrieving file: /boot/extlinux/extlinux.conf
	+	68 bytes read in 14 ms (3.9 KiB/s)
	+	1: buildroot
	+	Retrieving file: /boot/zImage
	+	4432336 bytes read in 217 ms (19.5 MiB/s)
	+	Retrieving file: /boot/rk3288-az01-mpc-acv8.dtb
	+	43772 bytes read in 11 ms (3.8 MiB/s)
	+	Kernel image @ 0x2000000 [ 0x000000 - 0x43a1d0 ]
	+	## Flattened Device Tree blob at 01f00000
	+	Booting using the fdt blob at 0x1f00000
	+	Loading Device Tree to 1fff2000, end 1ffffafb ... OK

	+	Starting kernel ...
	+
	+	Booting Linux on physical CPU 0x500
	+	Linux version 4.9.174-inmusic-2019-05-08-rt129 (buildroot@buildroot) (gcc version 7.4.0 (Buildroot 2019.02.2-05411-gf38c18c) ) #1 SMP PREEMPT RT Fri Nov 29 09:44:57 UTC 2019
	+	CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
	+	CPU: div instructions available: patching division code
	+	CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
	+	OF: fdt:Machine model: InMusic MPC ACV8
	+	OF: reserved mem: initialized node framebuffer, compatible id rockchip,framebuffer-memory
	+	Memory policy: Data cache writealloc
	+	percpu: Embedded 14 pages/cpu s28000 r8192 d21152 u57344
	+	Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
	+	Kernel command line: root=PARTUUID=24d1deac-3434-1a4e-98d1-68ee2945a5f1 rootwait ro console=ttyS2,115200 rfkill.default_state=0
	+	PID hash table entries: 4096 (order: 2, 16384 bytes)
	+	Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
	+	Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
	+	Memory: 2055804K/2097152K available (7168K kernel code, 370K rwdata, 1848K rodata, 1024K init, 311K bss, 29060K reserved, 12288K cma-reserved, 1298432K highmem)
	+	Virtual kernel memory layout:
	+	vector : 0xffff0000 - 0xffff1000 ( 4 kB)
	+	fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
	+	vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
	+	lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
	+	pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
	+	modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
	+	.text : 0xc0008000 - 0xc0800000 (8160 kB)
	+	.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
	+	.data : 0xc0b00000 - 0xc0b5c808 ( 371 kB)
	+	.bss : 0xc0b5e000 - 0xc0babcf4 ( 312 kB)
	+	SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
	+	Preemptible hierarchical RCU implementation.
	+	RCU kthread priority: 1.
	+	NR_IRQS:16 nr_irqs:16 16
	+	rockchip: reset MMC AHB arbitor
	+	rockchip_mmc_get_phase: invalid clk rate
	+	rockchip_mmc_get_phase: invalid clk rate
	+	rockchip_mmc_get_phase: invalid clk rate
	+	rockchip_mmc_get_phase: invalid clk rate
	+	rockchip_mmc_get_phase: invalid clk rate
	+	rockchip_mmc_get_phase: invalid clk rate
	+	rockchip_mmc_get_phase: invalid clk rate
	+	rockchip_mmc_get_phase: invalid clk rate
	+	arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
	+	clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
	+	sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
	+	Switching to timer-based delay loop, resolution 41ns
	+	Console: colour dummy device 80x30
	+	Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
	+	pid_max: default: 32768 minimum: 301
	+	Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
	+	Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
	+	CPU: Testing write buffer coherency: ok
	+	CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
	+	Setting up static identity map for 0x100000 - 0x100058
	+	CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
	+	CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
	+	CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
	+	Brought up 4 CPUs
	+	SMP: Total of 4 processors activated (192.00 BogoMIPS).
	+	CPU: All CPU(s) started in SVC mode.
	+	devtmpfs: initialized
	+	VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
	+	clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
	+	futex hash table entries: 1024 (order: 4, 65536 bytes)
	+	pinctrl core: initialized pinctrl subsystem
	+	NET: Registered protocol family 16
	+	DMA: preallocated 256 KiB pool for atomic coherent allocations
	+	cpuidle: using governor menu
	+	No ATAGs?
	+	hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
	+	hw-breakpoint: maximum watchpoint size is 4 bytes.
	+	vcc_mipi: supplied by vcc_sys
	+	vcc_sata: supplied by vcc_sys
	+	iommu: Adding device ff930000.vop to group 0
	+	SCSI subsystem initialized
	+	usbcore: registered new interface driver usbfs
	+	usbcore: registered new interface driver hub
	+	usbcore: registered new device driver usb
	+	pps_core: LinuxPPS API ver. 1 registered
	+	pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
	+	PTP clock support registered
	+	Advanced Linux Sound Architecture Driver Initialized.
	+	Bluetooth: Core ver 2.22
	+	NET: Registered protocol family 31
	+	Bluetooth: HCI device and connection manager initialized
	+	Bluetooth: HCI socket layer initialized
	+	Bluetooth: L2CAP socket layer initialized
	+	Bluetooth: SCO socket layer initialized
	+	clocksource: Switched to clocksource arch_sys_counter
	+	NET: Registered protocol family 2
	+	TCP established hash table entries: 8192 (order: 3, 32768 bytes)
	+	TCP bind hash table entries: 8192 (order: 5, 229376 bytes)
	+	TCP: Hash tables configured (established 8192 bind 8192)
	+	UDP hash table entries: 512 (order: 3, 32768 bytes)
	+	UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
	+	NET: Registered protocol family 1
	+	hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
	+	workingset: timestamp_bits=30 max_order=19 bucket_order=0
	+	squashfs: version 4.0 (2009/01/31) Phillip Lougher
	+	fuse init (API version 7.26)
	+	bounce: pool size: 64 pages
	+	Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
	+	io scheduler noop registered
	+	io scheduler deadline registered (default)
	+	dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
	+	dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
	+	dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
	+	dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
	+	Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
	+	ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
	+	ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 39, base_baud = 1500000) is a 16550A
	+	console [ttyS2] enabled
	+	ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 40, base_baud = 1500000) is a 16550A
	+	rk3x-i2c ff140000.i2c: Initialized RK3xxx I2C bus at f08b9000
	+	rk3x-i2c ff150000.i2c: Initialized RK3xxx I2C bus at f08bb000
	+	rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at f08bd000
	+	rk3x-i2c ff170000.i2c: Initialized RK3xxx I2C bus at f08bf000
	+	REG1: supplied by vcc_sys
	+	REG2: supplied by vcc_sys
	+	vcc_flash: supplied by VCC_IO
	+	vcc_sd: supplied by VCC_IO
	+	REG3: supplied by vcc_sys
	+	REG4: supplied by vcc_sys
	+	REG5: supplied by VCC_IO
	+	REG6: supplied by VCC_IO
	+	REG7: supplied by VCC_IO
	+	REG8: supplied by vcc_sys
	+	REG9: supplied by vcc_sys
	+	REG10: supplied by VCC_20
	+	REG11: supplied by VCC_20
	+	REG12: supplied by VCC_20
	+	fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
	+	fan53555-reg: supplied by vcc_sys
	+	fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
	+	fan53555-reg: supplied by vcc_sys
	+	rk3x-i2c ff650000.i2c: Initialized RK3xxx I2C bus at f08c1000
	+	[drm] Initialized
	+	rockchip_framebuffer_rmem_device_init: initializing with page address (null)
	+	rockchip-drm display-subsystem: assigned reserved memory node framebuffer
	+	rockchip-vop ff940000.vop: enabled by bootloader
	+	rockchip-drm display-subsystem: bound ff940000.vop (ops 0xc08439bc)
	+	rockchip-drm display-subsystem: bound ff930000.vop (ops 0xc08439bc)
	+	rockchip-drm display-subsystem: bound ff960000.mipi (ops 0xc0843248)
	+	[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
	+	[drm] No driver support for vblank timestamp query.
	+	rockchip-drm display-subsystem: fb0: frame buffer device
	+	mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
	+	mali ffa30000.gpu: Protected mode not available
	+	mali ffa30000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
	+	mali ffa30000.gpu: Probed as mali0
	+	brd: module loaded
	+	loop: module loaded
	+	random: fast init done
	+	libphy: Fixed MDIO Bus: probed
	+	ff580000.usb supply vusb_d not found, using dummy regulator
	+	ff580000.usb supply vusb_a not found, using dummy regulator
	+	dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
	+	dwc2 ff580000.usb: DWC OTG Controller
	+	dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
	+	dwc2 ff580000.usb: irq 43, io mem 0xff580000
	+	usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
	+	usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
	+	usb usb1: Product: DWC OTG Controller
	+	usb usb1: Manufacturer: Linux 4.9.174-inmusic-2019-05-08-rt129 dwc2_hsotg
	+	usb usb1: SerialNumber: ff580000.usb
	+	hub 1-0:1.0: USB hub found
	+	hub 1-0:1.0: 1 port detected
	+	ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
	+	ehci-platform: EHCI generic platform driver
	+	ehci-platform ff500000.usb: EHCI Host Controller
	+	ehci-platform ff500000.usb: new USB bus registered, assigned bus number 2
	+	ehci-platform ff500000.usb: irq 42, io mem 0xff500000
	+	ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00
	+	usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
	+	usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
	+	usb usb2: Product: EHCI Host Controller
	+	usb usb2: Manufacturer: Linux 4.9.174-inmusic-2019-05-08-rt129 ehci_hcd
	+	usb usb2: SerialNumber: ff500000.usb
	+	hub 2-0:1.0: USB hub found
	+	hub 2-0:1.0: 1 port detected
	+	ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
	+	ohci-platform: OHCI generic platform driver
	+	usbcore: registered new interface driver uas
	+	usbcore: registered new interface driver usb-storage
	+	usbcore: registered new interface driver usbserial
	+	usbcore: registered new interface driver usbserial_generic
	+	usbserial: USB Serial support registered for generic
	+	usbcore: registered new interface driver cp210x
	+	usbserial: USB Serial support registered for cp210x
	+	usbcore: registered new interface driver ftdi_sio
	+	usbserial: USB Serial support registered for FTDI USB Serial Device
	+	usbcore: registered new interface driver pl2303
	+	usbserial: USB Serial support registered for pl2303
	+	usbcore: registered new interface driver usb_serial_simple
	+	usbserial: USB Serial support registered for carelink
	+	usbserial: USB Serial support registered for zio
	+	usbserial: USB Serial support registered for funsoft
	+	usbserial: USB Serial support registered for flashloader
	+	usbserial: USB Serial support registered for google
	+	usbserial: USB Serial support registered for libtransistor
	+	usbserial: USB Serial support registered for vivopay
	+	usbserial: USB Serial support registered for moto_modem
	+	usbserial: USB Serial support registered for motorola_tetra
	+	usbserial: USB Serial support registered for novatel_gps
	+	usbserial: USB Serial support registered for hp4x
	+	usbserial: USB Serial support registered for suunto
	+	usbserial: USB Serial support registered for siemens_mpi
	+	usb5537 1-002d: Set state=0x87 on mask 0x8
	+	usb 2-1: new high-speed USB device number 2 using ehci-platform
	+	usb 2-1: New USB device found, idVendor=09e8, idProduct=503b
	+	usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
	+	usb 2-1: Product: MPC Live Hub
	+	usb 2-1: Manufacturer: Akai Professional
	+	hub 2-1:1.0: USB hub found
	+	hub 2-1:1.0: 7 ports detected
	+	usb 2-1.5: new high-speed USB device number 3 using ehci-platform
	+	usb 2-1.5: New USB device found, idVendor=09e8, idProduct=203b
	+	usb 2-1.5: New USB device strings: Mfr=1, Product=3, SerialNumber=0
	+	usb 2-1.5: Product: MPC Live Audio
	+	usb 2-1.5: Manufacturer: Akai Professional
	+	usb 2-1.6: new full-speed USB device number 4 using ehci-platform
	+	usb 2-1.6: language id specifier not provided by device, defaulting to English
	+	usb 2-1.6: New USB device found, idVendor=09e8, idProduct=003b
	+	usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
	+	usb 2-1.6: Product: MPC Live Controller
	+	usb 2-1.6: Manufacturer: Akai Pro
	+	usb5537 1-002d: Set state=0x82 on mask 0x8
	+	usb5537 1-002d: Disabled SS ports matching 0x8
	+	usb5537 1-002d: switched to HUB mode
	+	usb5537 1-002d: usb5537_probe: probed in hub mode
	+	usb5537 1-002d: reg 0x3c00 = 0x03
	+	usb5537 1-002d: reg 0x3c04 = 0x03
	+	usb5537 1-002d: reg 0x3c08 = 0x03
	+	usb5537 1-002d: reg 0x3c0c = 0x03
	+	usb5537 1-002d: reg 0x3c10 = 0x04
	+	usb5537 1-002d: reg 0x3c14 = 0x03
	+	usb5537 1-002d: reg 0x3c18 = 0x03
	+	usb5537 1-002d: reg 0x3c1c = 0x00
	+	usb5537 1-002d: reg 0x3c20 = 0x01
	+	usb5537 1-002d: reg 0x3c24 = 0x01
	+	usb5537 1-002d: reg 0x3c28 = 0x01
	+	usb5537 1-002d: reg 0x3c2c = 0x01
	+	usb5537 1-002d: reg 0x3c30 = 0x01
	+	usb5537 1-002d: reg 0x3c34 = 0x01
	+	usb5537 1-002d: reg 0x3c38 = 0x01
	+	mousedev: PS/2 mouse device common for all mice
	+	ili2116 4-0041: protocol version 02.03
	+	ili2116 4-0041: ILI2116 firmware version 0.0.4.0
	+	ili2116 4-0041: ILI2116 MCU kernel version 8.0.9.0.1
	+	input: ILI2116 Touchscreen as /devices/platform/ff160000.i2c/i2c-4/4-0041/input/input0
	+	rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0
	+	lirc_dev: IR Remote Control driver registered, major 245
	+	IR NEC protocol handler initialized
	+	IR RC5(x/sz) protocol handler initialized
	+	IR RC6 protocol handler initialized
	+	IR JVC protocol handler initialized
	+	IR Sony protocol handler initialized
	+	IR SANYO protocol handler initialized
	+	IR Sharp protocol handler initialized
	+	IR MCE Keyboard/mouse protocol handler initialized
	+	IR LIRC bridge handler initialized
	+	IR XMP protocol handler initialized
	+	power_supply sbs-3-000b: Not all required supplies found, defer probe
	+	sbs-battery 3-000b: sbs_probe: Failed to register power supply
	+	rk_tsadcv2_initialize: Missing rockchip,grf property
	+	Invalid the conversion, error=0
	+	Invalid the conversion, error=0
	+	Bluetooth: HCI UART driver ver 2.3
	+	Bluetooth: HCI UART protocol H4 registered
	+	hci_bcm bcm@0: BCM irq: -22
	+	hci_bcm bcm@0: bcm@0 device registered.
	+	Bluetooth: HCI UART protocol Broadcom registered
	+	Synopsys Designware Multimedia Card Interface Driver
	+	dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
	+	dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
	+	dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
	+	dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=0
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=1
	+	dwmmc_rockchip ff0c0000.dwmmc: 1 slots initialized
	+	dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
	+	dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
	+	dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
	+	dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
	+	dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq
	+	dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=1
	+	dwmmc_rockchip ff0d0000.dwmmc: dw_mci_switch_voltage: signal_voltage=0
	+	dwmmc_rockchip ff0d0000.dwmmc: dw_mci_switch_voltage: signal_voltage=1
	+	dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
	+	dwmmc_rockchip ff0d0000.dwmmc: 1 slots initialized
	+	dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode.
	+	dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller.
	+	dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a
	+	dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
	+	dwmmc_rockchip ff0d0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: allocated mmc-pwrseq
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=1
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_switch_voltage: signal_voltage=0
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_switch_voltage: signal_voltage=1
	+	dwmmc_rockchip ff0d0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0d0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
	+	dwmmc_rockchip ff0f0000.dwmmc: 1 slots initialized
	+	hidraw: raw HID events driver (C) Jiri Kosina
	+	usbcore: registered new interface driver usbhid
	+	usbhid: USB HID core driver
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
	+	mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
	+	mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
	+	usbcore: registered new interface driver snd-usb-audio
	+	ip_tables: (C) 2000-2006 Netfilter Core Team
	+	NET: Registered protocol family 10
	+	sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
	+	NET: Registered protocol family 17
	+	Bluetooth: HIDP (Human Interface Emulation) ver 1.2
	+	Bluetooth: HIDP socket layer initialized
	+	Registering SWP/SWPB emulation handler
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	power_supply sbs-3-000b: sbs-3-000b: Found supply : az01-ac-power
	+	sbs-battery 3-000b: bq40z50: battery gas gauge device registered
	+	input: gpio-keys as /devices/platform/gpio-keys/input/input1
	+	rtc-hym8563 0-0051: setting system clock to 2020-01-26 12:26:36 UTC (1580041596)
	+	vcc_sd: disabling
	+	ALSA device list:
	+	#0: Akai Professional MPC Live Audio at usb-ff500000.usb-1.5, high speed
	+	#1: Akai Pro MPC Live Controller at usb-ff500000.usb-1.6, full speed
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=1 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=1 clock=52000000 power_mode=2
	+	mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=3 timing=1 clock=52000000 power_mode=2
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_switch_voltage: signal_voltage=1
	+	dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=3 timing=8 clock=52000000 power_mode=2
	+	mmc2: new DDR MMC card at address 0001
	+	mmcblk2: mmc2:0001 SEM04G 3.69 GiB
	+	mmcblk2boot0: mmc2:0001 SEM04G partition 1 2.00 MiB
	+	mmcblk2boot1: mmc2:0001 SEM04G partition 2 2.00 MiB
	+	mmcblk2rpmb: mmc2:0001 SEM04G partition 3 2.00 MiB
	+	mmcblk2: p1 p2 p3 p4 p5 p6 p7
	+	dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=0 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=3 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=3 clock=25000000 power_mode=2
	+	mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
	+	mmc1: new ultra high speed SDR12 SDIO card at address 0001
	+	ttyS2 - failed to request DMA
	+	EXT4-fs (mmcblk2p6): couldn't mount as ext3 due to feature incompatibilities
	+	EXT4-fs (mmcblk2p6): mounted filesystem with ordered data mode. Opts: (null)
	+	VFS: Mounted root (ext4 filesystem) readonly on device 179:6.
	+	devtmpfs: mounted
	+	Freeing unused kernel memory: 1024K
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_switch_voltage: signal_voltage=0
	+	rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
	+	rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
	+	cgroup: cgroup2: unknown option "nsdelegate"
	+	systemd[1]: systemd 240 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_command_complete: got RTO
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	systemd[1]: Detected architecture arm.
	+
	+	Welcome to Buildroot 2019.02.2!
	+
	+	systemd[1]: Set hostname to <buildroot>.
	+	random: systemd: uninitialized urandom read (16 bytes read)
	+	systemd[1]: Initializing machine ID from random generator.
	+	systemd[1]: Installed transient /etc/machine-id file.
	+	systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
	+	systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=2
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_switch_voltage: signal_voltage=1
	+	rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
	+	rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=0 clock=400000 power_mode=2
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=3 clock=400000 power_mode=2
	+	systemd[1]: dev-disk-by\x2dpath-platform\x2dff0c0000.dwmmc\x2dpart1.device: Dependency Before=-.mount ignored (.device units cannot be delayed)
	+	random: systemd: uninitialized urandom read (16 bytes read)
	+	random: systemd: uninitialized urandom read (16 bytes read)
	+	systemd[1]: Started Forward Password Requests to Wall Directory Watch.
	+	dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=3 clock=25000000 power_mode=2
	+	mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
	+	[ OK mmc0: new ultra high speed SDR12 SDHC card at address 59b4
	+	] Started Forward Password R��…uests to Wall Directory Wammcblk0: mmc0:59b4 USD00 14.8 GiB
	+	tch.
	+	mmcblk0: p1
	+	systemd[1]: Listening on Journal Socket (/dev/log).
	+	[ OK ] Listening on Journal Socket (/dev/log).
	+	[ OK ] Reached target Remote File Systems.
	+	[ OK ] Started Dispatch Password ��…ts to Console Directory Watch.
	+	[ OK ] Reached target Paths.
	+	[ OK ] Listening on initctl Compatibility Named Pipe.
	+	[ OK ] Listening on udev Kernel Socket.
	+	[ OK ] Reached target Swap.
	+	[ OK ] Listening on udev Control Socket.
	+	[ OK ] Listening on Journal Socket.
	+	Starting Mali GPU driver setup for AZ01...
	+	Mounting Mount /media...
	+	Starting File System Check on Root Device...
	+	Starting Journal Service...
	+	Mounting Kernel Configuration File System...
	+	Starting Apply Kernel Variables...
	+	Mounting FUSE Control File System...
	+	Starting Create Static Device Nodes in /dev...
	+	Mounting Kernel Debug File System...
	+	[ OK ] Created slice system-serial\x2dgetty.slice.
	+	Mounting Temporary Directory (/tmp)...
	+	[ OK ] Reached target Slices.
	+	Starting udev Coldplug all Devices...
	+	[ OK ] Started Mali GPU driver setup for AZ01.
	+	[ OK ] Mounted Mount /media.
	+	[ OK ] Mounted Kernel Configuration File System.
	+	[ OK ] Mounted FUSE Control File System.
	+	[ OK ] Mounted Kernel Debug File System.
	+	[ OK ] Mounted Temporary Directory (/tmp).
	+	[ OK ] Started Apply Kernel Variables.
	+	[ OK ] Started Create Static Device Nodes in /dev.
	+	[ OK ] Started File System Check on Root Device.
	+	Starting Remount Root and Kernel File Systems...
	+	[ OK ] Started Remount Root and Kernel File Systems.
	+	Starting udev Kernel Device Manager...
	+	[ OK ] Reached target Local File Systems (Pre).
	+	[ OK ] Started udev Kernel Device Manager.
	+	[ OK ] Started Journal Service.
	+	[ OK ] Created slice system-btattach.slice.
	+	[ OK ] Found device /dev/ttyS2.
	+	[ OK ] Started udev Coldplug all Devices.
	+	[ OK ] Found device /dev/disk/by-��…d-ad59-0849-833a-9bf00af5b60e.
	+	[ OK ] Found device /dev/disk/by-��…platform-ff0c0000.dwmmc-part1.
	+	Mounting /media/az01-internal-sd...
	+	Starting Create /media/az0��…nal filesystem if necessary...
	+	[ OK ] Started Create /media/az01��…ernal filesystem if necessary.
	+	Mounting Mount /media/az01-internal...
	+	[ OK ] Mounted Mount /media/az01-internal.
	+	Starting Setup directories for overlayfs mounts...
	+	[ OK ] Started Setup directories for overlayfs mounts.
	+	Mounting Writable /var via OverlayFS...
	+	Mounting Writable /etc via OverlayFS...
	+	[ OK ] Mounted Writable /var via OverlayFS.
	+	[ OK ] Mounted Writable /etc via OverlayFS.
	+	Starting Fix transient machine-id after mounting /etc...
	+	Starting Flush Journal to Persistent Storage...
	+	[ OK ] Started Fix transient machine-id after mounting /etc.
	+	[ OK ] Mounted /media/az01-internal-sd.
	+	[ OK ] Started Flush Journal to Persistent Storage.
	+	[ OK ] Reached target Local File Systems.
	+	Starting Create Volatile Files and Directories...
	+	Starting Commit a transient machine-id on disk...
	+	[ OK ] Started Create Volatile Files and Directories.
	+	Starting Update UTMP about System Boot/Shutdown...
	+	[ OK ] Started Update UTMP about System Boot/Shutdown.
	+	[ OK ] Started Commit a transient machine-id on disk.
	+	[ OK ] Reached target System Initialization.
	+	[ OK ] Started Daily Cleanup of Temporary Directories.
	+	[ OK ] Reached target Timers.
	+	[ OK ] Listening on D-Bus System Message Bus Socket.
	+	[ OK ] Reached target Sockets.
	+	[ OK ] Reached target Basic System.
	+	[ OK ] Started AZ01 JMicron USB-SATA bridge configuration fixer.
	+	Starting Network Connectivity...
	+	Starting Firmware update for Ilitek touchscreens...
	+	Starting Hostname setup for MPC...
	+	[ OK ] Started Serial Getty on ttyS2.
	+	[ OK ] Reached target Login Prompts.
	+	[ OK ] Reached target Sound Card.
	+	Starting Remove all but the most recent core dump...
	+	[ OK ] Started Bluetooth HCI attach on ttyS0.
	+	[ OK ] Started AZ01 power button emergency shutdown service.
	+	Starting Bluetooth service...
	+	[ OK ] Started D-Bus System Message Bus.
	+	Starting Unsupported device detection service...
	+	Starting Firmware update for XMOS USB audio devices...
	+	[ OK ] Started Firmware update for Ilitek touchscreens.
	+	[ OK ] Started Remove all but the most recent core dump.
	+	[ OK ] Started Firmware update for XMOS USB audio devices.
	+	[ OK ] Started Network Connectivity.
	+	[ OK ] Started Bluetooth service.
	+	[ OK ] Started Unsupported device detection service.
	+	Starting Hostname Service...
	+	[ OK ] Started Hostname Service.
	+	[ OK ] Started Hostname setup for MPC.
	+	[ OK ] Reached target Network (Pre).
	+	Starting Connection service...
	+	[ OK ] Started Connection service.
	+	[ OK ] Reached target Network.
	+	[ OK ] Started AZ01 script runner service.
	+	[ OK ] Started AZ01 network MIDI service.
	+	[ OK ] Started InMusic MPC Application.
	+	[ OK ] Reached target Multi-User System.
	+	Starting Update UTMP about System Runlevel Changes...
	+	[ OK ] Reached target Bluetooth.
	+	Starting WPA supplicant...
	+	[ OK ] Started Update UTMP about System Runlevel Changes.
	+	[ OK ] Started WPA supplicant.
	+
	+	Welcome to Buildroot
	+	mpc-live login: root
	+	#
	+	</code>

user:trimen:mpclive:uboot

Anonymous (anonymous@undisclosed.example.com) — 2020-01-26T12:23:56+00:00

	current
Line 1:	Line 1:
	+	<code>
	+	U-Boot SPL 2016.05-inmusic-20170406 (Apr 06 2017 - 15:53:11)
	+	Trying to boot from MMC1

	+
	+	U-Boot 2016.05-inmusic-20170406 (Apr 06 2017 - 15:53:11 +0000), Build: jenkins-SME0-trunk-linux-587
	+
	+	Model: InMusic MPC ACV8
	+	DRAM: 2 GiB
	+	MMC: dwmmc@ff0f0000: 0
	+	In: gpio-keys
	+	Out: serial
	+	Err: serial
	+	Hit any key to stop autoboot: 0
	+	=>
	+	=> clock
	+	oscillator: 24000000
	+	clock-controller@ff760000: 24000000
	+	apll: 1608000000
	+	dpll: 533000000
	+	cpll: 400000000
	+	gpll: 594000000
	+	npll: 74000000
	+	external-gmac-clock: 125000000
	+	=>
	+	=> coninfo
	+	List of available devices:
	+	serial@ff690000 00000003 IO
	+	gpio-keys 00000001 I. stdin
	+	vidconsole 00000002 .O
	+	serial 00000003 IO stdout stderr
	+	nulldev 00000003 IO
	+	=>
	+	=> mmc info
	+	Device: dwmmc@ff0f0000
	+	Manufacturer ID: 45
	+	OEM: 100
	+	Name: SEM04
	+	Tran Speed: 52000000
	+	Rd Block Len: 512
	+	MMC version 4.5
	+	High Capacity: Yes
	+	Capacity: 3.7 GiB
	+	Bus Width: 8-bit
	+	Erase Group Size: 256 KiB
	+	HC WP Group Size: 8 MiB
	+	User Capacity: 3.7 GiB WRREL
	+	Boot Capacity: 2 MiB
	+	RPMB Capacity: 2 MiB
	+	=>
	+	=> printenv
	+	arch=arm
	+	az01_bootcmd=if test x${dorecovery} = x1; then run az01_recovercmd; fi; run distro_bootcmd; echo 'Boot failed, resetting to bootloader...'; reset_bootloader
	+	az01_recovercmd=echo 'Starting fastboot...'; fastboot 0
	+	baudrate=115200
	+	board=az01
	+	board_name=az01
	+	boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
	+	boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}extlinux/extlinux.conf
	+	boot_prefixes=/ /boot/
	+	boot_script_dhcp=boot.scr.uimg
	+	boot_scripts=boot.scr.uimg boot.scr
	+	boot_targets=mmc0 mmc1
	+	bootargs=root=PARTUUID=24d1deac-3434-1a4e-98d1-68ee2945a5f1 rootwait ro console=ttyS2,115200 rfkill.default_state=0
	+	bootcmd=run az01_bootcmd
	+	bootcmd_mmc0=setenv devnum 0; run mmc_boot
	+	bootcmd_mmc1=setenv devnum 1; run mmc_boot
	+	bootdelay=0
	+	cpu=armv7
	+	distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
	+	fastboot.partition-type:data=ext4
	+	fastboot.partition-type:rootfs=ext4
	+	fdt_addr_r=0x01f00000
	+	fdt_high=0x1fffffff
	+	fdtcontroladdr=7d373ba8
	+	fdtfile=rk3288-az01-mpc-acv8.dtb
	+	initrd_high=0x1fffffff
	+	kernel_addr_r=0x02000000
	+	loadaddr=0x00800800
	+	mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
	+	partitions=uuid_disk=02bebde5-b5a4-48cd-b262-512fe8b6ae06;name=uboot-spl,size=64KiB,start=32KiB,uuid=f6217a3c-1c7d-4969-8f05-88c0b9c0f0e6;name=env,size=8KiB,start=96KiB,uuid=be8b868f-89d8-4ff8-a64d-d077e73b4f09;name=uboot,size=384KiB,start=128KiB,uuid=461be792-3b29-4c0a-a6a2-3460c0119cbe;name=splash,size=4MiB,uuid=40bfa9cd-6d2c-4e22-a662-f0a803794462;name=recoverysplash,size=4MiB,uuid=e050b8e2-ee92-43ca-98ad-9aa4fbca8616;name=rootfs,bootable,size=500MiB,uuid=acded124-3434-4e1a-98d1-68ee2945a5f1;name=data,size=0,uuid=9dd41a93-59ad-4908-833a-9bf00af5b60e;
	+	pxefile_addr_r=0x00100000
	+	ramdisk_addr_r=0x04000000
	+	scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;
	+	scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist \|\| setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
	+	scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}extlinux/extlinux.conf; then echo Found ${prefix}extlinux/extlinux.conf; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
	+	scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
	+	scriptaddr=0x00000000
	+	serial#=A11702206102859
	+	soc=rockchip
	+	splashpos=m
	+	stderr=serial
	+	stdin=serial,gpio-keys
	+	stdout=serial
	+	vendor=inmusic
	+
	+	Environment size: 2969/8188 bytes
	+	=>
	+	=> showvar
	+	HUSH_VERSION=0.01
	+	=>
	+	=> version
	+
	+	U-Boot 2016.05-inmusic-20170406 (Apr 06 2017 - 15:53:11 +0000)
	+	arm-buildroot-linux-gnueabihf-gcc.br_real (Buildroot 2016.02) 5.3.0
	+	GNU ld (GNU Binutils) 2.25.1
	+	=>
	+
	+	</code>

brmlab user:trimen:mpclive

user:trimen:mpclive:bootlog

user:trimen:mpclive:uboot